As a single module or a whole production line, Cermac belt conveyors securely transport your packages or unpackaged products. Driven by the search for optimal solutions, our engineers and technicians work diligently on the adaptation of the different types of belt conveyors.
1 - Conventional hygienic belt conveyor for unpackaged products
The design of this straight conveyor has incorporated the simplification of belt replacement as a priority. This results in greater efficiency and speed for each action: removal from above by folding down two, pivoting ends located upstream and downstream; removal of pulleys and back-flexing rollers; removal of removable slider beds and disengagement of the vulcanized drive drum (O arrangement principle).
The specific benefits of this conveyor are:
centralization of belt tension in manual mode and in automatic mode, easier cleaning of the conveyor as a whole,
very quick belt replacement,
in compliance with CE and FDA regulations,
highly suitable for the food, pharmaceutical, and cosmetic industries.
150 mm to 1600 mm usable belt widths for conveyor lengths from 800 mm to 80,000 mm; specific dimensions upon request,
rotating line-ends with 7 mm, 14 mm or 43 mm diameter depending on the dimensions of the products to convey,
Options and finishings:
sprayed epoxy paint in suited RAL color, fully stainless steel and washable 304 L version, belt scraper and recuperation bin, automatic belt readjustment and acute diversion control, incremental sensor, asynchronous geared motor, servomotor, etc.
2 - Hygienic belt cantilever conveyor for unpackaged products
This cantilever conveyor benefits from easy belt replacement through side removal thanks to its distinct semi-? drive design.
This conveyor has four positive aspects:
easy removal of belt,
simplified integration into small volumes,
dynamic production flow management,
complies with CE and FDA standards; can be used in the food-processing, pharmaceutical, and cosmetic industries.
100 mm to 300 mm usable belt widths for conveyor lengths from 250 mm to 3,000 mm; specific dimensions upon request,
7 mm or 14 mm rotating line-ends depending on products to convey
manual or automatic belt tensioning.
Options and finishings:
sprayed epoxy paint in suited RAL color, washable stainless steel or 304L stainless steel version, belt scraper and recuperation bin, incremental sensor, asynchronous geared motor, servomotor, etc.
3 - Hygienic belt curved conveyor for unpackaged products
This curved belt conveyor has been designed especially for the particular constraints of the food-processing, pharmaceutical, and cosmetic industries:
easy belt replacement (removal from the inside),
construction adapted for environmental constraints, with frame and base in stainless steel or 304L stainless steel or sprayed epoxy paint in suitable RAL color.
This conveyor has three positive aspects:
easily reversible flow,
extremely silent operation (75 dB (A) at 60 m/min)
from 150 mm to 1,500 mm usable belt widths,
from 20 to 180 angles,
from 300 mm to 1,500 mm mean radii,
any specific dimensions on request,
rotating line-ends with 7 mm, 14 mm or 40 mm diameter, upstream and downstream.
belt scraper, recuperation bin, and other specific features.